05/15/10 - Unpainted Ceramic Bisque for Glass Fusing - Unpainted ceramic bisque comes in millions of patterns and designs. These are fantastic to use for slumping glass.
Check the piece carefully to assure that the glass will not get stuck in any crevices. If just adding frit to the piece there is only the preparation of adding a few layers of kiln wash, but if the piece is going to be used for slumping then you will need to also drill holes.
Determine areas where air might get trapped during the slumping process. These are the areas that will need to have a hole or two drilled to allow the air to escape.
Once washed with kiln wash check to make sure the pre-drilled holes are still open and clear.
No comments:
Post a Comment